NOUVELLES DENTS POUR LANDCOMMANDER

TO: All BRILLION SALES DIVISIONS

SUJET:  DENTS OPTIONNELS POUR LANDCOMMANDER II

Gentlemen,

At the June Sales Meeting we showed you an optional shank for the Landcommander. This shank (6K181) is 5" shorter than the standard 1K501 parabolic shank. The bottom of the shank is formed and punched so you can bolt on a chisel plow point, sweep or twisted shovel.

We also discussed a 5" shorter parabolic shaped shank (4K802) that would use the standard Landcommander points. This shank could be used on 15" shank spacing to allow you to have two different working depths of the shanks on one machine. The front rank of shanks could work 10" deep, while the rear rank could work 15" deep. This shank combination would require less horsepower. It is ideal for those producers who do not need total ground breakout across one particular depth setting.

Both of these shanks are available. When you write the order for a Landcommander simply add the number of shanks you want (4K802 or 6K181) and delete an equal number of 1K501 parabolic shanks. The price will remain the same. Be sure to order points. Points for the 6K181 chisel shank can be found on page 21 of the price list.

4K802 5" shorter parabolic shank for Landcommander

6K181 5" shorter chisel plow shank for Landcommander.

General Sales Manager 
Farm Implement Division              (RETOUR)